Click Image for Gallery
Liquitex High Gloss Varnish
What it does
- 100% acrylic polymer varnish adds a high gloss sheen, protects and resists dirt retention
- Dries clear to a flexible, non-tacky, hard surface
- Increases brightness and colour saturation
- Adjusts and unifies surface sheen
- Improves surface durability - ideal when shipping or exhibiting
- Protects colours from UV light damage
- Resists discolouration - yellowing and fogging - caused by humidity, heat and UV
- Depending on the substrate it allows surface moisture to pass through and breathe
- Allows for easy cleaning without fear of damaging the acrylic paint film
- Has excellent levelling properties - will not hold brush marks
- Semi-opaque when wet, transparent when dry
- Use on flexible or rigid supports
- Designed for interior and exterior use
How to use it
- Fully intermixable with all Liquitex products
- As this is permanent, do a patch test first
- Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness)
- Ensure your space is well ventilated and dirt and dust-free
- Place the artwork flat on a surface - always varnish horizontally
- Stir gently before use
- Use long, even strokes, covering the surface top to bottom while moving from one side to the other - don't go over bits you have missed but leave to dry and then re-varnish area
- While applying, look out for surface bubbles and even them out immediately
- Apply up to three thin coats, allowing at least three hours dry time between coats
How not to use it
- Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry
- Don't apply with a roller or sponge brushDon't thin with water
- Don't apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness
- Don't go back over areas you have already done, as this can cause clouding
- Don't attempt to remove once applied
- Do not use with any non-acrylic media